水泥井模具主要選用的是鋼模具，如果選用鋼模具每天的生產量是每天脫模一次，如果定制小尺寸的鋼模具，可以一天脫模兩次，鋼模具選用的是半干料混凝土，可以等到水泥制品初凝以后就可以脫模，一般來說定制水泥井模具的數量比較少，檢查井鋼模具為了脫模方便，都是分截預制的，在使用過程中可以拼接使用，不同米數的產品就可以拼接使用，這樣對于產品就有了更好的使用。
Steel mold is mainly used for cement well mold. If steel mold is selected, the production volume is demoulded once a day. If small-sized steel mold is customized, demoulding can be carried out twice a day. Semi dry concrete is selected for steel mold, and demoulding can be carried out after the initial setting of cement products. Generally speaking, the number of customized cement well mold is relatively small. In order to demould, the steel mold of inspection well can be demoulded The mold is convenient, and it is all cut and prefabricated. It can be spliced in the use process, and the products of different meters can be spliced, so that the products can be better used.
水泥井模具選用鋼模具生產，水泥井只能選用鋼模具進行生產，因為不同類型的鋼模具，在安裝生產過程中，也是不一樣的，水泥井模具的不同類型，鋼模具裝配就如同組裝機器一樣，每一個部件，每個螺釘都不能出錯，否則后果會相當嚴重，輕則導致產品缺陷，影響生產，重則徹底損害模具，造成報廢。所以裝配的活一定要非常的細致。
The cement well mold is produced by steel mold, and the cement well can only be produced by steel mold, because different types of steel mold are different in the process of installation and production. Different types of cement well mold, steel mold assembly is like assembly machine, each component and screw can not make mistakes, otherwise the consequences will be quite serious, and light will lead to product defects, Affect the production, seriously damage the mold, resulting in scrap. So the assembly work must be very meticulous.
關于模具的使用過程，尤其是要注意水泥井模具的清潔工作，鋼模具生產出來的水泥制品沒有塑料模具的光滑，所以對于鋼模具光面的光滑程度也是不一樣的，實際的生產過程，鋼模具的表面光滑程度對模具質量的影響最小，水泥制品屬于比較粗糙的模具，可能對于不同生產工藝的模具，要求也是不同的。
As for the use process of the mold, especially the cleaning work of the cement well mold, the cement products produced by the steel mold are not as smooth as the plastic mold, so the smooth degree of the steel mold is also different. In the actual production process, the smooth degree of the steel mold surface has the least impact on the quality of the mold. The cement products belong to the relatively rough mold, which may affect the quality of the mold In different production process of the mold, the requirements are different.
打印