排水井模具是按照加工出來的這些預制件并不是尺寸單一，而是尺寸變化多端可以按照工程的要求進行定做生產，現在對于不同模具的加工方式有著很多，如果使用以前的生產方式進行模具的制作，會影響到模具成型的質量，也會導致模具在使用的時候容易出現變形的問題，所以現在工廠對于混凝土井體模具的加工方式都進行了創新改變，自然也用到了專業的生產工具進行處理�；炷辆w模具的定做其實比較簡單，施工方需要準備的就是模具的專業設計圖紙，如果無法保證圖紙的準確性，可以請專業的設計人員提供圖紙，其實圖紙是模具加工重要的參考之一，尺寸不能夠出現任何的誤差，將圖紙提供給工廠后工人就可以根據圖紙的尺寸進行材料的選擇了，將這些鋼板進行切割與焊接后，檢查表面焊接的殘渣后進行打磨處理，一定要保證好整體的光滑，這樣可以減少泥漿在凝固后的摩擦效果，在取出預制件的時候就會更加的方便，不會出現阻滯的問題，當然也能夠加快后面的生產工序。
The drainage well mold is processed according to the processing. These prefabricated parts are not of single size, but are variable in size. They can be customized according to the requirements of the project. Now there are many processing methods for different molds. If the former production mode is used to make the mold, the quality of the mold will be affected, and the mold will easily change when it is used The problem of shape, so now the factory for the concrete well mold processing methods have been innovative changes, natural also used professional production tools for processing. In fact, the customization of concrete well body mold is relatively simple. What the construction party needs to prepare is the professional design drawing of the mold. If the accuracy of the drawing cannot be guaranteed, the professional designer can provide the drawing. In fact, the drawing is one of the important references for mold processing, and the size cannot have any error. After the drawing is provided to the factory, the workers can according to the size of the drawing After the steel plates are cut and welded, the welding residues on the surface are checked and polished. The overall smoothness must be ensured. In this way, the friction effect of the slurry after solidification can be reduced. When the prefabricated parts are taken out, it will be more convenient without blocking. Of course, it can also speed up the subsequent production process.
排水井模具的詳細數據也是有著規定的，這是供檢查人員或者專業設備檢測的井室，大多都是不過水的，承載能力與以前的磚砌井和塑料井相比有了質的改變，而且使用混凝土一次成型的施工效率更快。排水檢查井模具用的是鋼模板焊接，雖然造價有了提高，相比之下，質量的改變更應該值得引起注意，鋼模具的優勢明顯，做出來的混凝土預制產品密實度也是很高的，滿足了檢查井與管道銜接設計的要求，根據排水管道的大小和數量的不同所以有的時候排水井的設計也有不同，這是為了讓排水的效果更好，有的還分成了上井室和下井室的組成部分，用部分帶動整體的流動性更好，收水口是在井室和井圈之間的位置，作用就是調整井室內徑尺寸，所以承壓力也是經得住考驗的。建成以后的排水檢查井，我們應該經過檢驗合格后再使用，它的質量規格形狀都應該符合規定。
The detailed data of drainage well mold is also specified, which is for inspection personnel or professional equipment testing well chamber, most of which are not water, bearing capacity compared with the previous brick well and plastic well has a qualitative change, and the construction efficiency of using concrete once molding is faster. The mould of drainage inspection well is welded with steel formwork. Although the cost has been improved, the change of quality should be paid more attention to. The advantages of steel mold are obvious, and the density of prefabricated concrete products is also very high, which can meet the requirements of connection design between inspection well and pipeline. According to the size and quantity of drainage pipeline, sometimes drainage well has its own advantages The design is also different. This is to make the drainage effect better. Some parts are also divided into the upper chamber and the lower chamber, which can drive the overall fluidity better. The water intake is located between the well chamber and the well ring, and its function is to adjust the inner diameter of the well chamber, so the bearing pressure can withstand the test. After the completion of the drainage inspection well, we should pass the inspection before using, its quality specification shape should meet the requirements.
打印