檢查井模具大家已經很熟悉了，它是市政工程上常用到的模具產品之一。檢查井模具一般按形狀分為圓形檢查井模具和方形檢查井模具，井口部分采用錐形收口，上面是井蓋。一般的檢查井模具采用3mm的鋼板制作而成，加強筋板采用5mm的角鐵加固。檢查井模具的使用大大的方便了水泥檢查井的成型速度，一般情況下一天出一模，如果采用蒸養的話出模速度會更快一些。
Inspection well mold we are very familiar with, it is one of the mold products commonly used in municipal engineering. The inspection well mould is generally divided into circular inspection well mould and square inspection well mould according to the shape. The wellhead part adopts conical closing, and the top is the well cover. The general inspection well mold is made of 3mm steel plate, and the stiffener plate is reinforced with 5mm angle iron. The use of the first mock exam mold greatly facilitates the molding speed of the cement inspection well. In normal circumstances, a mold is produced one day, and if the steam curing is used, the mold speed will be quicker.
檢查井模具是生產水泥檢查井的主要工具,它的結構設計合理,抗壓力強,受力均勻,經多次負荷試驗不變形,不斷裂,應用于地下井的鋼模具,節省占地面積.我廠是專業生產檢查井鋼模具的企業,我們的產品主要有圓形檢查井鋼模具,方形檢查井鋼模具,排水檢查井鋼模具,電力檢查井模具等,可根據各地的實際情況進行獨特設計以滿足客戶不同需要.檢查井鋼模具的性能穩定,操作簡單方便,并在人員配置與維修保養和模具產業的綜合投資上都做到了減少與節約,而且在電力消耗上也具有很高的優勢.檢查井模具應適合壓鑄生產工藝的要求,并且技術經濟性合理.所成型的鑄件,應符合壓鑄件圖上說規定的形狀尺寸及各項技術要求,特別是要設法保證高精度和高質量部位達到要求.模具上各種零件應滿足機械加工工藝和熱處理工藝的要求,選材適當,配合精度選用合理.在保證制件質量和安全生產的前提下,應采用合理先進和簡單的結構,使動作準確可靠,構件剛性良好,易損件拆換方便,并有利于延長模具工作壽命.
Inspection well mould is the main tool for producing cement inspection well. It has reasonable structure design, strong pressure resistance, uniform stress, no deformation and fracture after repeated load tests. It is applied to steel mould of underground well, saving floor area. Our factory is specialized in producing inspection well steel mould. Our products mainly include round inspection well steel mould, square inspection well steel mould and drainage inspection well steel mould, The performance of steel mould for inspection well is stable, the operation is simple and convenient, and the personnel allocation, maintenance and comprehensive investment of mould industry are reduced and saved, Besides, it also has a high advantage in power consumption. The inspection well steel mold should be suitable for the requirements of die casting production process, and the technical economy is reasonable. The formed castings should meet the shape, size and various technical requirements specified on the die casting drawing, In particular, we should try to ensure that the parts with high precision and high quality meet the requirements. Various parts on the mold should meet the requirements of machining process and heat treatment process, with appropriate material selection and reasonable matching precision selection. On the premise of ensuring the quality of parts and safe production, we should adopt reasonable, advanced and simple structure, so that the action is accurate and reliable, the rigidity of components is good, and the removal and replacement of vulnerable parts is convenient, It is beneficial to prolong the working life of the die
打印