Inspection well mold drainage, dirt is not easy to stay and reduce blockage. Specification of steel mould for general cement well body: inner diameter 1m, outer diameter 1m. 2m, 1m high and 70cm closing. The steel plate used for the steel mold of the inspection well is 4mm thick and the rib is 8mm thick. The specific size can be customized. The main plate is made of 8mm and the main plate is made of 4mm. Size of steel mould for power well: the mould for conventional inspection well is 150cm high, 100cm inner diameter, 120cm outer diameter and 70cm wellhead diameter, which is composed of well body mould, wellhead mould, well cover mould and well body connecting hole steel mould.
The characteristics and structure of manhole molds are closely related to the data information of several factors such as circle, inner diameter, wall thickness and height width ratio, while the production and manufacturing of sewage manhole molds are carried out according to the main production relations. Therefore, after the verification of different plans and schemes, for example, the concrete sewage wells manufactured by cast-in-situ production often cut holes at the bottom, The prefabricated parts of sewage well manufactured by prefabricated production are application connection holes (called plugs or reserved holes in some areas). The difference between the two production relations has led to the change of the manufacturing plan of sewage well molds. It is mainly in the process of production characteristics and structure of sewage inspection well molds, which usually depends on the detailed description obtained from each order, such as the inner diameter size, the concrete wall thickness, the number of sets required for each model and specification, etc, This basic data information is the same on the corresponding basis, but it involves different municipal pipe network projects or rainwater and sewage diversion projects, and there will be wells with different height width ratio. Whether sewage wells or other inspection wells, with the service support of our factory and with the help of the production capacity of employees, the requirements of inspection well template shall be applied in each region to ensure the smooth progress of each project.