The observation well mold is one of many inspection well molds, which is cylindrical in shape. According to the production standards and manufacturing habits of the inspection well, 4mm steel plate should be selected for cutting. The cutting standard of steel plate is the drawing for designing and manufacturing the mold, which shows the height and wall thickness of the mold, Then the cutting workers will accurately cut the steel plate according to the size on the drawing, and then weld the cut steel plate into shape with an electric welding machine. Some steel plates shall be lifted in advance, so as to facilitate the machinery to help the workers transport the mold. When using the mold of the electric inspection well, it is necessary to splice each template together, and then grout the mold, Because the circular inspection wells are mass-produced and require a large amount of concrete, it is recommended that the domestic tank truck of the prefabrication plant mix the concrete, but the mixing time should be appropriate. If the time is too short, the concrete can not achieve uniform effect. If the time is too long, the concrete will produce initial setting. Therefore, pay attention to observing at any time during the mixing process, After the concrete is mixed evenly, the assembled mold of the electric inspection well shall be poured in turn. In addition, in order to make the prefabricated parts harder, the woven reinforcement can be put into the mold before pouring the slurry, so that the reinforcement is fixed by the concrete, which will greatly increase the firmness of the concrete block.
Observation well mould is the main tool for producing cement inspection well. It has reasonable structural design, strong pressure resistance, uniform stress, no deformation and fracture after many load tests. It is applied to the steel mould of underground well to save floor area. Our factory is an enterprise specializing in the production of inspection well steel mould. Our products mainly include circular inspection well steel mould, square inspection well steel mould and drainage inspection well steel mould, The steel mould of electric inspection well can be uniquely designed according to the actual situation of various places to meet the different needs of customers. The steel mould of inspection well has stable performance, simple and convenient operation, and has achieved reduction and saving in personnel allocation, maintenance and comprehensive investment in mould industry, and also has high advantages in power consumption