Wind power foundation steel formwork is a kind of special-shaped steel mould. It is mainly the prefabricated blocks produced through the base foundation mould, which are generally used at the bottom of wind power generation and electric poles. Most of the base foundation prefabricated blocks provided by it are of special-shaped structure, and the production of various prefabricated blocks is completed through the steel formwork. The production of steel molds for wind and solar energy foundation base should be supported by complete drawings, such as front view, side view, etc., so that the produced molds can meet the actual needs. The demand of general wind power foundation base is very large, and the volume is also large. The steel formwork can bear the pressure of concrete. No matter what shape it is, the special-shaped steel formwork is processed one by one under the cutting and welding of skilled workers. The foundation of the base is often solid or hollow inside. Therefore, the manufacturer of the base needs the control of the internal mold and the external mold, and each set of formwork will be different according to different materials, thickness and weight, which mainly depends on the number of times of using the mold. The fan foundation steel formwork is welded with high-quality thickened steel plate and fixed with stiffened plate to strengthen the hardness of the formwork and improve the utilization rate of the formwork. The fan foundation steel formwork structure is combined, with simple formwork removal and convenient operation.
The production principle of wind power foundation steel formwork wind power foundation mold is from multiple angles, such as the material, technology and production mode of the mold, which can be effectively used in our production and life. What we need to do well is the construction and installation of the mold. Firstly, in order to give full play to the overall performance of the mold, we need to pay attention to the design of the mold installation construction drawings according to the actual situation of the production site before the installation of the foundation base mold. Secondly, in order to make the construction procedure systematic, we also need to mark out some problems that may occur during installation in the construction drawings, and pre judge and solve them in advance. Before installation, the overall steel plate and various parts of the die need to be checked in detail and registered.