流水槽模具主要是為了生產混凝土流水槽的而定制的鋼模板，因為在尺寸方面存在不統一性，所以模具的生產都是以實際圖紙要求為主的，所以在生產完成后需要對模具本身進行檢查，看看是否模具表面會出現生銹損壞的情況，如果有這種情況的出現就不能進行下一步的生產了，因為生產出的產品可能會不標準，影響U型水槽預制件的使用效果。為了能夠使成型后的產品在水利工程建設以及農田灌溉等方面發揮出重要的作用，利昌模具需要對模具進行更換。在生產制作U型水槽模具之前，工人需要根據特定的要求進行制作，像尺寸結構要求等都要根據規定完成。流水槽模具一般用于馬路兩側的排水設施，避免路面積水，引發交通事故；這種模具的使用能夠很大的程度上保障每一段公路的順利通行，大陸的地形有著千差萬別；保障隧道、立交橋等的排水流暢，公路鐵路的建設要以安全為主，U型槽的使用成為了很關鍵性的應用。
The flow channel mould is mainly a customized steel formwork for the production of concrete flow channel. Because there is inconsistency in size, the production of the mould is mainly based on the requirements of the actual drawings. Therefore, after the production is completed, the mould itself needs to be checked to see if the surface of the mould will be rusted and damaged, If this happens, the next step of production cannot be carried out, because the products produced may not be standard, which will affect the use effect of U-shaped water tank prefabricated parts. In order to make the formed products play an important role in water conservancy project construction and farmland irrigation, Lichang mould needs to be replaced. Before manufacturing the U-shaped sink mold, workers need to make it according to specific requirements, such as size and structure requirements. The gutter mould is generally used for the drainage facilities on both sides of the road to avoid water in the road area and traffic accidents; The use of this mold can ensure the smooth passage of each section of highway to a great extent, and the terrain of the mainland is very different; To ensure the smooth drainage of tunnels and overpasses, the construction of roads and railways should focus on safety, and the use of U-groove has become a key application.
流水槽模具廣泛的應用于道路建設上，水槽模具型號尺寸齊全工廠生產加工各種各樣的模具以供道路使用，我廠具有一定的生產規模和經驗，嚴格的模具滿足生產需求。水槽模具，預制水槽模具，U型水槽模具定制混凝土排水溝節省水資源的使用，對農田灌溉、綠地建設灌溉還有馬路排水非常有幫助。根據水槽模具使用和圖紙的設計，我們會選在不用的材料，例如鋼材，鋼的材料也是多種多樣的，不同的尺寸選用不同的鋼材。如果尺寸很大的話，我們需要使用5mm厚的鋼板，如果尺寸在50cm左右長，質量沒有那么大，可以選用3mm的鋼材。很多排水槽的形狀為U型，個別地區的風格使用矩形或者梯形。
Flume molds are widely used in road construction. Flume molds have complete models and sizes. The factory produces and processes a variety of molds for road use. Our factory has a certain production scale and experience, and strict molds meet the production needs. Sink mold, prefabricated sink mold, U-shaped sink mold, customized concrete drainage ditch, saving the use of water resources, which is very helpful for farmland irrigation, green space construction irrigation and road drainage. According to the use of sink mold and the design of drawings, we will choose different materials, such as steel. The materials of steel are also diverse, and different steels are selected for different sizes. If the size is large, we need to use 5mm thick steel plate. If the size is about 50cm long and the quality is not so large, 3mm steel can be selected. The shape of many drainage channels is U-shaped, and the style of individual areas uses rectangle or trapezoid.
打印